武进高新技术产业开发区
T093C 仪表
将测力信号转换为数字通讯信号、标准模拟输出信号及简单控制场合。模拟输出信号可选择4~20mA、0~±10V。数字通讯接口可选择RS485或者RS232，ModBus-RTU协议。
● 14位模拟输出信号可以选择 4~20mA、0~±10 V
● 数字通讯接口可选择 RS485或者RS232
● 多种滤波调试模式，更容易获取目标值
● 供电及信号均有隔离处理，抗干扰能力强，数据采集和输出更稳定
● LED显示实时重量值，峰值等
● 可比较输出，峰值捕获，峰值比较输出
● 非砝码标定，TEDS 自动校准
● 高速采样（最高1600次）、显示速度快
● 控制器电源采用隔离DC24V±10%，供电更加安全稳定
● 面板式安装，操作简单
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● 14-bit analog output signal can choose 4~20mA, 0~±10 V
● Digital communication interface can choose RS485 or RS232
● Multiple filter debugging modes, easier to obtain target value
● Power supply and signal are isolated, strong anti-interference ability, more stable data acquisition and output
● LED displays real-time weight value, peak value, etc.
● Comparable output, peak capture, peak compare output
● Non-weight calibration, TEDS automatic calibration
● High-speed sampling (up to 1600 times), fast display speed
● The controller power supply adopts isolated DC24V±10%, the power supply is more secure and stable
● Panel installation, easy operation
特点
● 用于需要测力信号转换为数字通讯信号、标准模拟输出信号及简单控制场合● 14位模拟输出信号可以选择 4~20mA、0~±10 V
● 数字通讯接口可选择 RS485或者RS232
● 多种滤波调试模式，更容易获取目标值
● 供电及信号均有隔离处理，抗干扰能力强，数据采集和输出更稳定
● LED显示实时重量值，峰值等
● 可比较输出，峰值捕获，峰值比较输出
● 非砝码标定，TEDS 自动校准
● 高速采样（最高1600次）、显示速度快
● 控制器电源采用隔离DC24V±10%，供电更加安全稳定
● 面板式安装，操作简单
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● 14-bit analog output signal can choose 4~20mA, 0~±10 V
● Digital communication interface can choose RS485 or RS232
● Multiple filter debugging modes, easier to obtain target value
● Power supply and signal are isolated, strong anti-interference ability, more stable data acquisition and output
● LED displays real-time weight value, peak value, etc.
● Comparable output, peak capture, peak compare output
● Non-weight calibration, TEDS automatic calibration
● High-speed sampling (up to 1600 times), fast display speed
● The controller power supply adopts isolated DC24V±10%, the power supply is more secure and stable
● Panel installation, easy operation
关键词:
关键词： T093C 仪表
电话:
产品详细信息
应用行业Application
安装尺寸Mounting Dimension
参数表Parameters Table
| 显示窗口 | 低功耗 LED 显示 | 满量程温度漂移 | ≤10 ppm/℃ |
| 输出规格 | 4~20 mA、0~±10V | 温度对零点漂移 | ≤10 μ V/℃ |
| 输出线性 | ＜0.01% | 电源供给 | 24 ±10% VDC |
| 综合精度 | 优于0.01% | 激励电压 | 5 VDC |
| A/D 转换速度 | ＞100-400 次/秒 | 工作温度范围 | -40~85 ℃ |
| 接受灵敏度 | ±30 mV/V | 单件重量 | 0.5 Kg |
| 输入负载 | 1~4 只350Ω传感器 | 整机功耗 | ≤8W |
| Display | Low power LED display | Temp. effect on out | ≤10 ppm/℃ |
| Ouput mode | 4~20 mA、0~±10V | Temp. effect on zero balance (TKo) | ≤10 μ V/℃ |
| Output linearity | ＜0.01% | Power supply | 24 ±10% VDC |
| Accuracy | better than 0.01% | Excitation Voltage | 5 VDC |
| A/D conversion speed | ＞100-400 times/s | Service Temperature Range | -40~85 ℃ |
| Sensitivity | ±30 mV/V | Weight (G),approx. | 0.5 Kg |
| Limit load | 1~4 350Ω sensors | Power consumption | ≤8W |
相关产品
暂无信息
