武进高新技术产业开发区
数据采集
提供接线盒、信号放大器、采集仪表等多种类型数据采集设备 将测力信号转换为数字通讯信号、标准模拟输出信号及简单控制场合。
采用专业防水接头，一进一出接线盒，多个信号集成。
● 补偿调节采用高稳定型多圈电位器
● 盖板有防水橡胶垫圈，防水，防尘，适用于环境条件恶劣的工业现场
● 防止感应雷和浪涌信号对传感器的损坏
● 一进一出接线盒
● 多个信号集成
● Use special waterproof connector
● Compensation adjustment adopts high stability multi-turn potentiometer
● The cover plate has a waterproof rubber gasket, which is waterproof and dustproof, suitable for industrial sites with harsh environmental conditions
● Prevent damage to the sensor from induced lightning and surge signals
● One-in-one-out junction box
● Multiple signal integration
特点
● 采用专用防水接头● 补偿调节采用高稳定型多圈电位器
● 盖板有防水橡胶垫圈，防水，防尘，适用于环境条件恶劣的工业现场
● 防止感应雷和浪涌信号对传感器的损坏
● 一进一出接线盒
● 多个信号集成
● Use special waterproof connector
● Compensation adjustment adopts high stability multi-turn potentiometer
● The cover plate has a waterproof rubber gasket, which is waterproof and dustproof, suitable for industrial sites with harsh environmental conditions
● Prevent damage to the sensor from induced lightning and surge signals
● One-in-one-out junction box
● Multiple signal integration
电源与信号隔离，抗干扰能力强。
● 电源与信号隔离，抗干扰能力强
● 高精度，经筛选的精密运放、精密电阻
● 多级有源滤波处理，输出信号稳定准确
● 适应多种灵敏度传感器，零点可调范围宽
● Collection of various output signals ±10V, 4-20mA, 0~20mA
● Power and signal isolation, strong anti-interference ability
● High precision, screened precision op amps, precision resistors
● Multi-stage active filter processing, the output signal is stable and accurate
● Adapt to a variety of sensitivity sensors, wide adjustable range of zero point
特点
● 集合多种输出信号±10V，4-20mA，0~20mA● 电源与信号隔离，抗干扰能力强
● 高精度，经筛选的精密运放、精密电阻
● 多级有源滤波处理，输出信号稳定准确
● 适应多种灵敏度传感器，零点可调范围宽
● Collection of various output signals ±10V, 4-20mA, 0~20mA
● Power and signal isolation, strong anti-interference ability
● High precision, screened precision op amps, precision resistors
● Multi-stage active filter processing, the output signal is stable and accurate
● Adapt to a variety of sensitivity sensors, wide adjustable range of zero point
特点
● 采用专用防水接头● 补偿调节采用高稳定性的多圈电位器
● 盖板有防水橡胶垫圈，防水，防尘，适用于环境条件恶劣的工业现场
● 防止感应雷和浪涌信号对传感器的损坏
● 四进一出接线盒
Features
● Using special waterproof connector● Use the multi-turn potentiometer with high stability to do compensation and adjustment
● Cover with waterproof rubber gasket which could be waterproof and dustproof,suitable for harsh industrial conditions
● Prevent sensor damage from lightning induction and surge signal
● Use one input and one output junction box
特点
● 多点线性校准● 多量程、多分度、多采样频率
● 标准ModBUS-RTU通讯
● 防护等级IP66
● 一进一出数字变送器
● 宽电源供电: 7~ 25VDC
Features
● Using special waterproof connector● Use the multi-turn potentiometer with high stability to do compensation and adjustment
● Cover with waterproof rubber gasket which could be waterproof and dustproof, suitable for harsh industrial conditions
● Multiple Linearity adjustment points with different capacity, different division and sampling rate
● IP66 protection digital transducer
● Powersupply:7 ~ 25VDC
将测力信号转换为数字通讯信号、标准模拟输出信号及简单控制场合。模拟输出信号可选择4~20mA、0~±10V。数字通讯接口可选择RS485或者RS232，ModBus-RTU协议。
● 模拟输出信号可以选择 4~20mA、0~±10 V
● 数字通讯接口可选择 RS485或者RS232
● 多种滤波调试模式，更容易获取目标值
● 供电及信号均有隔离处理，抗干扰能力强，数据采集和输出更稳定
● LED显示实时重量值，峰值等
● 可比较输出，峰值捕获，峰值比较输出
● 非砝码标定，TEDS 自动校准
● 高速采样（最高1600次）、显示速度快
● 控制器电源采用隔离DC24V±10%，供电更加安全稳定
● 35mm标准工业导轨安装
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● Analog output signal can choose 4~20mA, 0~±10 V
● Digital communication interface can choose RS485 or RS232
● Multiple filter debugging modes, easier to obtain target value
● Power supply and signal are isolated, strong anti-interference ability, more stable data acquisition and output
● LED displays real-time weight value, peak value, etc.
● Comparable output, peak capture, peak compare output
● Non-weight calibration, TEDS automatic calibration
● High-speed sampling (up to 1600 times), fast display speed
● The controller power supply adopts isolated DC24V±10%, the power supply is more secure and stable
● 35mm standard industrial rail installation
特点
● 用于需要测力信号转换为数字通讯信号、标准模拟输出信号及简单控制场合● 模拟输出信号可以选择 4~20mA、0~±10 V
● 数字通讯接口可选择 RS485或者RS232
● 多种滤波调试模式，更容易获取目标值
● 供电及信号均有隔离处理，抗干扰能力强，数据采集和输出更稳定
● LED显示实时重量值，峰值等
● 可比较输出，峰值捕获，峰值比较输出
● 非砝码标定，TEDS 自动校准
● 高速采样（最高1600次）、显示速度快
● 控制器电源采用隔离DC24V±10%，供电更加安全稳定
● 35mm标准工业导轨安装
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● Analog output signal can choose 4~20mA, 0~±10 V
● Digital communication interface can choose RS485 or RS232
● Multiple filter debugging modes, easier to obtain target value
● Power supply and signal are isolated, strong anti-interference ability, more stable data acquisition and output
● LED displays real-time weight value, peak value, etc.
● Comparable output, peak capture, peak compare output
● Non-weight calibration, TEDS automatic calibration
● High-speed sampling (up to 1600 times), fast display speed
● The controller power supply adopts isolated DC24V±10%, the power supply is more secure and stable
● 35mm standard industrial rail installation
将测力信号转换为数字通讯信号、标准模拟输出信号及简单控制场合。数字通讯接口可选择RS485或者RS232，ModBus-RTU协议。
● 标配一个串口 RS485或者RS232，支持Modbus-RTU协议
● 6位LED数码管字高7.1mm，4个状态指示灯
● 控制器带有上限、中限、下限界限判断功能
● 可选配最多8个输出，8个输入
● 5级动态数字滤波，200次/秒值比较速度
● 可通过上位机进行驱动控制器输出，可部分替代PLC
● 标准工业导轨安装（DIN）
● 适用于定值控制系统，检重秤，包装秤，过程力测量与控制
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● Standard one serial port RS485 or RS232, support Modbus-RTU protocol
● 6-digit LED digital tube character height 7.1mm, 4 status indicators
● The controller has upper limit, middle limit and lower limit judgment function
● Optional up to 8 outputs, 8 inputs
● 5-level dynamic digital filtering, 200 times/second value comparison speed
● The output of the drive controller can be carried out through the host computer, which can partially replace the PLC
● Standard Industrial Rail Mount (DIN)
● Suitable for fixed value control systems, checkweighers, packaging scales, process force measurement and control
特点
● 用于需要测力信号转换为数字通讯信号、标准模拟输出信号及简单控制场合● 标配一个串口 RS485或者RS232，支持Modbus-RTU协议
● 6位LED数码管字高7.1mm，4个状态指示灯
● 控制器带有上限、中限、下限界限判断功能
● 可选配最多8个输出，8个输入
● 5级动态数字滤波，200次/秒值比较速度
● 可通过上位机进行驱动控制器输出，可部分替代PLC
● 标准工业导轨安装（DIN）
● 适用于定值控制系统，检重秤，包装秤，过程力测量与控制
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● Standard one serial port RS485 or RS232, support Modbus-RTU protocol
● 6-digit LED digital tube character height 7.1mm, 4 status indicators
● The controller has upper limit, middle limit and lower limit judgment function
● Optional up to 8 outputs, 8 inputs
● 5-level dynamic digital filtering, 200 times/second value comparison speed
● The output of the drive controller can be carried out through the host computer, which can partially replace the PLC
● Standard Industrial Rail Mount (DIN)
● Suitable for fixed value control systems, checkweighers, packaging scales, process force measurement and control
特点
● 用于需要将测力信号转换为数字通讯信号、标准模拟输出信号及简单控制的场合● 模拟输出信号可选择0-20mA、4-20mA. 0-10V、1-5V,数字通讯接口可选择RS485或RS232
● 双排6位LED数码管分别显示实时测量值、峰值、输出电流值、1I/O状态信息
● 控制器带有上限、中限、下限界限判断功能
● I/O有4入6出，可自定义输入输出端口功能
● 可通过上位机进行驱动控制器输出，可部分替代PLC
● 控制器供电电源采用DC24V供电，压宽士5V，更加安全稳定
● 开孔式面板安装，面板面积仅110mm (宽) x62mm (高)
Features
● Use for turning the analog force signal to digital output, the standard analog output signal and simple control of the occasion● Analog output signal could be 020mA, 4-20mA 0-10V, 1-5V, digital communication interface as RS485 or RS232
● Dual 6-digit LED digital tube shows real-time measurement, peak, output current value,1/ 0 status information
● Controller with the upper, middle and lower limits judgment
● 1/O4 input and 6 output, you can customize the input and output port function
● Can be driven by the host computer controller output, can replace part of the alternative PLC
● DC24V power supply, voltage土5V, more secure and stable
● Dimension of panel is only 110mm (width) x 92mm (high)
将测力信号转换为数字通讯信号、标准模拟输出信号及简单控制场合。模拟输出信号可选择4~20mA、0~±10V。数字通讯接口可选择RS485或者RS232，ModBus-RTU协议。
● 14位模拟输出信号可以选择 4~20mA、0~±10 V
● 数字通讯接口可选择 RS485或者RS232
● 多种滤波调试模式，更容易获取目标值
● 供电及信号均有隔离处理，抗干扰能力强，数据采集和输出更稳定
● LED显示实时重量值，峰值等
● 可比较输出，峰值捕获，峰值比较输出
● 非砝码标定，TEDS 自动校准
● 高速采样（最高1600次）、显示速度快
● 控制器电源采用隔离DC24V±10%，供电更加安全稳定
● 面板式安装，操作简单
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● 14-bit analog output signal can choose 4~20mA, 0~±10 V
● Digital communication interface can choose RS485 or RS232
● Multiple filter debugging modes, easier to obtain target value
● Power supply and signal are isolated, strong anti-interference ability, more stable data acquisition and output
● LED displays real-time weight value, peak value, etc.
● Comparable output, peak capture, peak compare output
● Non-weight calibration, TEDS automatic calibration
● High-speed sampling (up to 1600 times), fast display speed
● The controller power supply adopts isolated DC24V±10%, the power supply is more secure and stable
● Panel installation, easy operation
特点
● 用于需要测力信号转换为数字通讯信号、标准模拟输出信号及简单控制场合● 14位模拟输出信号可以选择 4~20mA、0~±10 V
● 数字通讯接口可选择 RS485或者RS232
● 多种滤波调试模式，更容易获取目标值
● 供电及信号均有隔离处理，抗干扰能力强，数据采集和输出更稳定
● LED显示实时重量值，峰值等
● 可比较输出，峰值捕获，峰值比较输出
● 非砝码标定，TEDS 自动校准
● 高速采样（最高1600次）、显示速度快
● 控制器电源采用隔离DC24V±10%，供电更加安全稳定
● 面板式安装，操作简单
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● 14-bit analog output signal can choose 4~20mA, 0~±10 V
● Digital communication interface can choose RS485 or RS232
● Multiple filter debugging modes, easier to obtain target value
● Power supply and signal are isolated, strong anti-interference ability, more stable data acquisition and output
● LED displays real-time weight value, peak value, etc.
● Comparable output, peak capture, peak compare output
● Non-weight calibration, TEDS automatic calibration
● High-speed sampling (up to 1600 times), fast display speed
● The controller power supply adopts isolated DC24V±10%, the power supply is more secure and stable
● Panel installation, easy operation
将测力信号转换为数字通讯信号、标准模拟输出信号及简单控制场合。数字通讯接口可选择RS485或者RS232，ModBus-RTU协议。
● 标配一个串口 RS485或者RS232，支持Modbus-RTU协议
● 6位LED数码管字高7.1mm，4个状态指示灯
● 控制器带有上限、中限、下限界限判断功能
● 可选配最多8个输出，8个输入
● 5级动态数字滤波，200次/秒值比较速度
● 可通过上位机进行驱动控制器输出，可部分替代PLC
● 标准工业导轨安装（DIN）
● 适用于定值控制系统，检重秤，包装秤，过程力测量与控制
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● Standard one serial port RS485 or RS232, support Modbus-RTU protocol
● 6-digit LED digital tube character height 7.1mm, 4 status indicators
● The controller has upper limit, middle limit and lower limit judgment function
● Optional up to 8 outputs, 8 inputs
● 5-level dynamic digital filtering, 200 times/second value comparison speed
● The output of the drive controller can be carried out through the host computer, which can partially replace the PLC
● Standard Industrial Rail Mount (DIN)
● Suitable for fixed value control systems, checkweighers, packaging scales, process force measurement and control
特点
● 用于需要测力信号转换为数字通讯信号、标准模拟输出信号及简单控制场合● 标配一个串口 RS485或者RS232，支持Modbus-RTU协议
● 6位LED数码管字高7.1mm，4个状态指示灯
● 控制器带有上限、中限、下限界限判断功能
● 可选配最多8个输出，8个输入
● 5级动态数字滤波，200次/秒值比较速度
● 可通过上位机进行驱动控制器输出，可部分替代PLC
● 标准工业导轨安装（DIN）
● 适用于定值控制系统，检重秤，包装秤，过程力测量与控制
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● Standard one serial port RS485 or RS232, support Modbus-RTU protocol
● 6-digit LED digital tube character height 7.1mm, 4 status indicators
● The controller has upper limit, middle limit and lower limit judgment function
● Optional up to 8 outputs, 8 inputs
● 5-level dynamic digital filtering, 200 times/second value comparison speed
● The output of the drive controller can be carried out through the host computer, which can partially replace the PLC
● Standard Industrial Rail Mount (DIN)
● Suitable for fixed value control systems, checkweighers, packaging scales, process force measurement and control
特点
● 主要应用于PLC控制系统或DCS.计算机管理控制系统，仪表将重量通过串口或以太网口或PROFINET工业以太网将重量传输给PLC或DCS、计算机;● 支持1到4路台秤接入，AD最大速率200次/秒
● 100000高显示精度，6000e CMC认证精度
● 1路RS232/485串口，2路以太网口( 100M)，自带交换机功能
● 支持MODBUS-RTU & MODBUS -TCP
● 支持PROFINET, TCP/IP
● 支持手机APP或计算机工具配置仪表和标定
● 标准工业导轨安装(DIN )
Features
● This indicator is an industry weighing controller, high accuracy, support 1 to 4scales input, and support PROFINET and MODBUS-TCP communication, typical for weighing,batching, flling system work together with PLC or DCS● 1 to 4 scales input, 200HZ ADC speed
● 100000display division, 6000e CMC approval
● One Serial port: RS232/485, 2LAN port
● MODBUS-RTU & MODUBS-TCP
● PROFINET for Siemens, TCP Report weight
● Mobile APP Configure and Calibration
● PC tool Configure and Calibration
● Standard industrial rail mounting (DIN)
将测力信号转换为数字通讯信号、标准模拟输出信号及简单控制场合。模拟输出信号可选择4~20mA、0~±10V数字通讯接口可选择RS485或者RS232，ModBus-RTU协议。
● 模拟输出信号可以选择 4~20mA、0~±10 V
● 数字通讯接口可选择 RS485或者RS232
● 多种滤波调试模式，更容易获取目标值
● 供电及信号均有隔离处理，抗干扰能力强，数据采集和输出更稳定
● 可比较输出，峰值捕获，峰值比较输出
● 非砝码标定，TEDS自动校准
● 高速采样（最高1600次）、显示速度快
● 控制器电源采用隔离DC24V ±10%，供电更加安全稳定
● 35mm 标准工业导轨安装
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● Analog output signal can choose 4~20mA, 0~±10 V
● Digital communication interface can choose RS485 or RS232
● Multiple filter debugging modes, easier to obtain target value
● Power supply and signal are isolated, strong anti-interference ability, more stable data acquisition and output
● Comparable output, peak capture, peak compare output
● Non-weight calibration, TEDS automatic calibration
● High-speed sampling (up to 1600 times), fast display speed
● The controller power supply adopts isolated DC24V ±10%, the power supply is more secure and stable
● 35mm standard industrial rail mounting
特点
● 用于需要测力信号转换为数字通讯信号、标准模拟输出信号及简单控制场合● 模拟输出信号可以选择 4~20mA、0~±10 V
● 数字通讯接口可选择 RS485或者RS232
● 多种滤波调试模式，更容易获取目标值
● 供电及信号均有隔离处理，抗干扰能力强，数据采集和输出更稳定
● 可比较输出，峰值捕获，峰值比较输出
● 非砝码标定，TEDS自动校准
● 高速采样（最高1600次）、显示速度快
● 控制器电源采用隔离DC24V ±10%，供电更加安全稳定
● 35mm 标准工业导轨安装
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● Analog output signal can choose 4~20mA, 0~±10 V
● Digital communication interface can choose RS485 or RS232
● Multiple filter debugging modes, easier to obtain target value
● Power supply and signal are isolated, strong anti-interference ability, more stable data acquisition and output
● Comparable output, peak capture, peak compare output
● Non-weight calibration, TEDS automatic calibration
● High-speed sampling (up to 1600 times), fast display speed
● The controller power supply adopts isolated DC24V ±10%, the power supply is more secure and stable
● 35mm standard industrial rail mounting
防反接、防过压、防过流、抗浪涌，数字化标定、清零、零点跟踪、防抖滤波
特点
● 集合多种输出信号土10V,4 ~ 20mA,0~ 20mA● 电源与信号隔离，抗干扰能力强
● 高精度，经筛选的精密运放、精密电阻
● 多级有源滤波处理，输出信号稳定准确
● 适应多种灵敏度传感器，零点可调范围宽
Features
● Multi-output +10V,4~ 20mA,0~ 20mA● The power is isolated from signal, strong anti-interference ability.
● High accuracy, high precision amplifying and resistance
● Stable and accurate output with multi-grades active filter.
● Could be connected with multi-capacity load cells with wide scope of zero point adjustment
与压电加速度传感器连接，组成测试系统，可对振动、力、压力等物理参数进行测量；广泛应用于机械制造、动力制造、航空、航天、航海、建筑、化爆等部门；本仪器具有二阶巴特沃斯低通滤波器，从而可提高信噪比，获得最佳测试结果。
● 本仪器具有二阶巴特沃斯低通滤波器，从而可提高信噪比，获得最佳测试结果。
● This instrument is a single-channel small quasi-static charge amplifier, which is connected to a piezoelectric accelerometer,It constitutes a test system, which can measure physical parameters such as vibration, force, and pressure, and is widely used in machinery manufacturing.Power manufacturing, aviation, navigation, construction, chemical explosion and other departments.
● The instrument features a second-order Butterworth low-pass filter, which improves the signal-to-noise ratio for optimal test results.
特点
● 本仪器是一种单通道小型准静态电荷放大器，它和压电加速度传感器连接，组成测试系统，可对振动，力，压力等物理参数进行测量，广泛应用于机械制造，动力制造，航空，航海，建筑，化爆等部门。● 本仪器具有二阶巴特沃斯低通滤波器，从而可提高信噪比，获得最佳测试结果。
● This instrument is a single-channel small quasi-static charge amplifier, which is connected to a piezoelectric accelerometer,It constitutes a test system, which can measure physical parameters such as vibration, force, and pressure, and is widely used in machinery manufacturing.Power manufacturing, aviation, navigation, construction, chemical explosion and other departments.
● The instrument features a second-order Butterworth low-pass filter, which improves the signal-to-noise ratio for optimal test results.
