武进高新技术产业开发区 
售前咨询 ：
搜索
产品分类
全部分类
全部分类
T098 放大器
采用专业防水接头，一进一出接线盒，多个信号集成。
● 补偿调节采用高稳定型多圈电位器
● 盖板有防水橡胶垫圈，防水，防尘，适用于环境条件恶劣的工业现场
● 防止感应雷和浪涌信号对传感器的损坏
● 一进一出接线盒
● 多个信号集成
● Use special waterproof connector
● Compensation adjustment adopts high stability multi-turn potentiometer
● The cover plate has a waterproof rubber gasket, which is waterproof and dustproof, suitable for industrial sites with harsh environmental conditions
● Prevent damage to the sensor from induced lightning and surge signals
● One-in-one-out junction box
● Multiple signal integration
特点
● 采用专用防水接头● 补偿调节采用高稳定型多圈电位器
● 盖板有防水橡胶垫圈，防水，防尘，适用于环境条件恶劣的工业现场
● 防止感应雷和浪涌信号对传感器的损坏
● 一进一出接线盒
● 多个信号集成
● Use special waterproof connector
● Compensation adjustment adopts high stability multi-turn potentiometer
● The cover plate has a waterproof rubber gasket, which is waterproof and dustproof, suitable for industrial sites with harsh environmental conditions
● Prevent damage to the sensor from induced lightning and surge signals
● One-in-one-out junction box
● Multiple signal integration
T098H 放大器
电源与信号隔离，抗干扰能力强。
● 电源与信号隔离，抗干扰能力强
● 高精度，经筛选的精密运放、精密电阻
● 多级有源滤波处理，输出信号稳定准确
● 适应多种灵敏度传感器，零点可调范围宽
● Collection of various output signals ±10V, 4-20mA, 0~20mA
● Power and signal isolation, strong anti-interference ability
● High precision, screened precision op amps, precision resistors
● Multi-stage active filter processing, the output signal is stable and accurate
● Adapt to a variety of sensitivity sensors, wide adjustable range of zero point
特点
● 集合多种输出信号±10V，4-20mA，0~20mA● 电源与信号隔离，抗干扰能力强
● 高精度，经筛选的精密运放、精密电阻
● 多级有源滤波处理，输出信号稳定准确
● 适应多种灵敏度传感器，零点可调范围宽
● Collection of various output signals ±10V, 4-20mA, 0~20mA
● Power and signal isolation, strong anti-interference ability
● High precision, screened precision op amps, precision resistors
● Multi-stage active filter processing, the output signal is stable and accurate
● Adapt to a variety of sensitivity sensors, wide adjustable range of zero point
T094W仪表
将测力信号转换为数字通讯信号、标准模拟输出信号及简单控制场合。模拟输出信号可选择4~20mA、0~±10V。数字通讯接口可选择RS485或者RS232，ModBus-RTU协议。
● 模拟输出信号可以选择 4~20mA、0~±10 V
● 数字通讯接口可选择 RS485或者RS232
● 多种滤波调试模式，更容易获取目标值
● 供电及信号均有隔离处理，抗干扰能力强，数据采集和输出更稳定
● LED显示实时重量值，峰值等
● 可比较输出，峰值捕获，峰值比较输出
● 非砝码标定，TEDS 自动校准
● 高速采样（最高1600次）、显示速度快
● 控制器电源采用隔离DC24V±10%，供电更加安全稳定
● 35mm标准工业导轨安装
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● Analog output signal can choose 4~20mA, 0~±10 V
● Digital communication interface can choose RS485 or RS232
● Multiple filter debugging modes, easier to obtain target value
● Power supply and signal are isolated, strong anti-interference ability, more stable data acquisition and output
● LED displays real-time weight value, peak value, etc.
● Comparable output, peak capture, peak compare output
● Non-weight calibration, TEDS automatic calibration
● High-speed sampling (up to 1600 times), fast display speed
● The controller power supply adopts isolated DC24V±10%, the power supply is more secure and stable
● 35mm standard industrial rail installation
特点
● 用于需要测力信号转换为数字通讯信号、标准模拟输出信号及简单控制场合● 模拟输出信号可以选择 4~20mA、0~±10 V
● 数字通讯接口可选择 RS485或者RS232
● 多种滤波调试模式，更容易获取目标值
● 供电及信号均有隔离处理，抗干扰能力强，数据采集和输出更稳定
● LED显示实时重量值，峰值等
● 可比较输出，峰值捕获，峰值比较输出
● 非砝码标定，TEDS 自动校准
● 高速采样（最高1600次）、显示速度快
● 控制器电源采用隔离DC24V±10%，供电更加安全稳定
● 35mm标准工业导轨安装
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● Analog output signal can choose 4~20mA, 0~±10 V
● Digital communication interface can choose RS485 or RS232
● Multiple filter debugging modes, easier to obtain target value
● Power supply and signal are isolated, strong anti-interference ability, more stable data acquisition and output
● LED displays real-time weight value, peak value, etc.
● Comparable output, peak capture, peak compare output
● Non-weight calibration, TEDS automatic calibration
● High-speed sampling (up to 1600 times), fast display speed
● The controller power supply adopts isolated DC24V±10%, the power supply is more secure and stable
● 35mm standard industrial rail installation
T094H 仪表
将测力信号转换为数字通讯信号、标准模拟输出信号及简单控制场合。数字通讯接口可选择RS485或者RS232，ModBus-RTU协议。
● 标配一个串口 RS485或者RS232，支持Modbus-RTU协议
● 6位LED数码管字高7.1mm，4个状态指示灯
● 控制器带有上限、中限、下限界限判断功能
● 可选配最多8个输出，8个输入
● 5级动态数字滤波，200次/秒值比较速度
● 可通过上位机进行驱动控制器输出，可部分替代PLC
● 标准工业导轨安装（DIN）
● 适用于定值控制系统，检重秤，包装秤，过程力测量与控制
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● Standard one serial port RS485 or RS232, support Modbus-RTU protocol
● 6-digit LED digital tube character height 7.1mm, 4 status indicators
● The controller has upper limit, middle limit and lower limit judgment function
● Optional up to 8 outputs, 8 inputs
● 5-level dynamic digital filtering, 200 times/second value comparison speed
● The output of the drive controller can be carried out through the host computer, which can partially replace the PLC
● Standard Industrial Rail Mount (DIN)
● Suitable for fixed value control systems, checkweighers, packaging scales, process force measurement and control
特点
● 用于需要测力信号转换为数字通讯信号、标准模拟输出信号及简单控制场合● 标配一个串口 RS485或者RS232，支持Modbus-RTU协议
● 6位LED数码管字高7.1mm，4个状态指示灯
● 控制器带有上限、中限、下限界限判断功能
● 可选配最多8个输出，8个输入
● 5级动态数字滤波，200次/秒值比较速度
● 可通过上位机进行驱动控制器输出，可部分替代PLC
● 标准工业导轨安装（DIN）
● 适用于定值控制系统，检重秤，包装秤，过程力测量与控制
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● Standard one serial port RS485 or RS232, support Modbus-RTU protocol
● 6-digit LED digital tube character height 7.1mm, 4 status indicators
● The controller has upper limit, middle limit and lower limit judgment function
● Optional up to 8 outputs, 8 inputs
● 5-level dynamic digital filtering, 200 times/second value comparison speed
● The output of the drive controller can be carried out through the host computer, which can partially replace the PLC
● Standard Industrial Rail Mount (DIN)
● Suitable for fixed value control systems, checkweighers, packaging scales, process force measurement and control
T093C 仪表
将测力信号转换为数字通讯信号、标准模拟输出信号及简单控制场合。模拟输出信号可选择4~20mA、0~±10V。数字通讯接口可选择RS485或者RS232，ModBus-RTU协议。
● 14位模拟输出信号可以选择 4~20mA、0~±10 V
● 数字通讯接口可选择 RS485或者RS232
● 多种滤波调试模式，更容易获取目标值
● 供电及信号均有隔离处理，抗干扰能力强，数据采集和输出更稳定
● LED显示实时重量值，峰值等
● 可比较输出，峰值捕获，峰值比较输出
● 非砝码标定，TEDS 自动校准
● 高速采样（最高1600次）、显示速度快
● 控制器电源采用隔离DC24V±10%，供电更加安全稳定
● 面板式安装，操作简单
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● 14-bit analog output signal can choose 4~20mA, 0~±10 V
● Digital communication interface can choose RS485 or RS232
● Multiple filter debugging modes, easier to obtain target value
● Power supply and signal are isolated, strong anti-interference ability, more stable data acquisition and output
● LED displays real-time weight value, peak value, etc.
● Comparable output, peak capture, peak compare output
● Non-weight calibration, TEDS automatic calibration
● High-speed sampling (up to 1600 times), fast display speed
● The controller power supply adopts isolated DC24V±10%, the power supply is more secure and stable
● Panel installation, easy operation
特点
● 用于需要测力信号转换为数字通讯信号、标准模拟输出信号及简单控制场合● 14位模拟输出信号可以选择 4~20mA、0~±10 V
● 数字通讯接口可选择 RS485或者RS232
● 多种滤波调试模式，更容易获取目标值
● 供电及信号均有隔离处理，抗干扰能力强，数据采集和输出更稳定
● LED显示实时重量值，峰值等
● 可比较输出，峰值捕获，峰值比较输出
● 非砝码标定，TEDS 自动校准
● 高速采样（最高1600次）、显示速度快
● 控制器电源采用隔离DC24V±10%，供电更加安全稳定
● 面板式安装，操作简单
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● 14-bit analog output signal can choose 4~20mA, 0~±10 V
● Digital communication interface can choose RS485 or RS232
● Multiple filter debugging modes, easier to obtain target value
● Power supply and signal are isolated, strong anti-interference ability, more stable data acquisition and output
● LED displays real-time weight value, peak value, etc.
● Comparable output, peak capture, peak compare output
● Non-weight calibration, TEDS automatic calibration
● High-speed sampling (up to 1600 times), fast display speed
● The controller power supply adopts isolated DC24V±10%, the power supply is more secure and stable
● Panel installation, easy operation
T089 仪表
将测力信号转换为数字通讯信号、标准模拟输出信号及简单控制场合。数字通讯接口可选择RS485或者RS232，ModBus-RTU协议。
● 标配一个串口 RS485或者RS232，支持Modbus-RTU协议
● 6位LED数码管字高7.1mm，4个状态指示灯
● 控制器带有上限、中限、下限界限判断功能
● 可选配最多8个输出，8个输入
● 5级动态数字滤波，200次/秒值比较速度
● 可通过上位机进行驱动控制器输出，可部分替代PLC
● 标准工业导轨安装（DIN）
● 适用于定值控制系统，检重秤，包装秤，过程力测量与控制
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● Standard one serial port RS485 or RS232, support Modbus-RTU protocol
● 6-digit LED digital tube character height 7.1mm, 4 status indicators
● The controller has upper limit, middle limit and lower limit judgment function
● Optional up to 8 outputs, 8 inputs
● 5-level dynamic digital filtering, 200 times/second value comparison speed
● The output of the drive controller can be carried out through the host computer, which can partially replace the PLC
● Standard Industrial Rail Mount (DIN)
● Suitable for fixed value control systems, checkweighers, packaging scales, process force measurement and control
特点
● 用于需要测力信号转换为数字通讯信号、标准模拟输出信号及简单控制场合● 标配一个串口 RS485或者RS232，支持Modbus-RTU协议
● 6位LED数码管字高7.1mm，4个状态指示灯
● 控制器带有上限、中限、下限界限判断功能
● 可选配最多8个输出，8个输入
● 5级动态数字滤波，200次/秒值比较速度
● 可通过上位机进行驱动控制器输出，可部分替代PLC
● 标准工业导轨安装（DIN）
● 适用于定值控制系统，检重秤，包装秤，过程力测量与控制
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● Standard one serial port RS485 or RS232, support Modbus-RTU protocol
● 6-digit LED digital tube character height 7.1mm, 4 status indicators
● The controller has upper limit, middle limit and lower limit judgment function
● Optional up to 8 outputs, 8 inputs
● 5-level dynamic digital filtering, 200 times/second value comparison speed
● The output of the drive controller can be carried out through the host computer, which can partially replace the PLC
● Standard Industrial Rail Mount (DIN)
● Suitable for fixed value control systems, checkweighers, packaging scales, process force measurement and control
T098D 放大器
将测力信号转换为数字通讯信号、标准模拟输出信号及简单控制场合。模拟输出信号可选择4~20mA、0~±10V数字通讯接口可选择RS485或者RS232，ModBus-RTU协议。
● 模拟输出信号可以选择 4~20mA、0~±10 V
● 数字通讯接口可选择 RS485或者RS232
● 多种滤波调试模式，更容易获取目标值
● 供电及信号均有隔离处理，抗干扰能力强，数据采集和输出更稳定
● 可比较输出，峰值捕获，峰值比较输出
● 非砝码标定，TEDS自动校准
● 高速采样（最高1600次）、显示速度快
● 控制器电源采用隔离DC24V ±10%，供电更加安全稳定
● 35mm 标准工业导轨安装
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● Analog output signal can choose 4~20mA, 0~±10 V
● Digital communication interface can choose RS485 or RS232
● Multiple filter debugging modes, easier to obtain target value
● Power supply and signal are isolated, strong anti-interference ability, more stable data acquisition and output
● Comparable output, peak capture, peak compare output
● Non-weight calibration, TEDS automatic calibration
● High-speed sampling (up to 1600 times), fast display speed
● The controller power supply adopts isolated DC24V ±10%, the power supply is more secure and stable
● 35mm standard industrial rail mounting
特点
● 用于需要测力信号转换为数字通讯信号、标准模拟输出信号及简单控制场合● 模拟输出信号可以选择 4~20mA、0~±10 V
● 数字通讯接口可选择 RS485或者RS232
● 多种滤波调试模式，更容易获取目标值
● 供电及信号均有隔离处理，抗干扰能力强，数据采集和输出更稳定
● 可比较输出，峰值捕获，峰值比较输出
● 非砝码标定，TEDS自动校准
● 高速采样（最高1600次）、显示速度快
● 控制器电源采用隔离DC24V ±10%，供电更加安全稳定
● 35mm 标准工业导轨安装
● It is used for occasions requiring force measurement signal to be converted into digital communication signal, standard analog output signal and simple control
● Analog output signal can choose 4~20mA, 0~±10 V
● Digital communication interface can choose RS485 or RS232
● Multiple filter debugging modes, easier to obtain target value
● Power supply and signal are isolated, strong anti-interference ability, more stable data acquisition and output
● Comparable output, peak capture, peak compare output
● Non-weight calibration, TEDS automatic calibration
● High-speed sampling (up to 1600 times), fast display speed
● The controller power supply adopts isolated DC24V ±10%, the power supply is more secure and stable
● 35mm standard industrial rail mounting
上一页
1
下一页
